SUSPA's hydraulic adjustment system Movotec for industrial applications

Hydraulic lift systems in the industrial sector

The hydraulic Movotec lift system consists of cylinders and a pump that is driven with a hand crank or an electric motor. The drive generated in this way drives the oil out of the pump into the cylinders or from the cylinders back into the pump. The cylinders are thus extended or retracted within the provided adjustment range (stroke).

The Movotec product range is composed of the following systems:

Bolt-On System with Hand Crank

The Bolt-On system is delivered as a kit for retrofitting. Using the retrofit system, you can retrofit your work table that previously could not be adjusted in height with just a few steps, thus making it height-adjustable.

System Includes

Pump with hand crank
Four "Bolt-On" lift cylinders
Two 2.5m (8 ft.) and two 3m (10 ft.) sections of flexible tubing
Four glides
Drilling templates, tubing clips and cable ties
Installation and operating instructions

Movotec "Bolt-On" lift systems are readily available, shipped completely assembled and ready for installation.

The dimensions "A," "B," "X" and "Y" of the drawings (Pump and CB cylinder) depend on the "maximum load" and the "adjustment range." Please use the table to determine the desired model of the bolt-on adjustment system.

System max. load (kg / lbs.)	Adjustment range (mm / in.)	System part number	Pump	Cylinder (4x)
340 / 750	150 / 5.9	MLS-00001	Q4809	CB415
	200 / 7.9	MLS-00002	Q4812	CB420
	300 / 11.8	MLS-00003	Q4818	CB431
	400 / 15.7	MLS-00004	Q4824	CB440
454 / 1000	150 / 5.9	MLS-00005	Q4612	CB415
	200 / 7.9	MLS-00006	Q4615	CB420
	300 / 11.8	MLS-00007	Q4623	CB431
	400 / 15.7	MLS-00008	Q4631	CB440
590 / 1300	150 / 5.9	MLS-00080	Q4615	CB615
	230 / 9.1	MLS-00081	Q4623	CB631
	300 / 11.8	MLS-00082	Q4631	CB631
	393 / 15.5	MLS-00083	Q4639	CB640

Downloads

Bolt-On System with Motor

The Bolt-On system is delivered as a kit for retrofitting. Using the retrofit system, you can retrofit your work table that previously could not be adjusted in height with just a few steps, thus making it height-adjustable.

System Includes

Pump with motor, controller and switch
Four "Bolt-On" lift cylinders
Two 2.5mm (8 ft.) and two 3m (10 ft.) sections of flexible tubing
Four glides
Drilling templates, tubing clips and cable ties
Installation and operating instructions

Movotec "Bolt-On" lift systems are readily available, shipped completely assembled and ready for installation.

The dimensions "A," "B" and "Z" of the drawings listed below (pump and CB cylinder) depend on the selected "maximum load" and the "adjustment range." Please use the table to determine the desired model of the bolt-on adjustment system.

System max. load (kg / lbs.)	Adjustment range (mm / in.)	System part number	Pump	Cylinder (4x)
340 / 750	150 / 5.9	MLS-00001E	Q4809	CB415
	200 / 7.9	MLS-00002E	Q4812	CB420
	300 / 11.8	MLS-00003E	Q4818	CB431
	400 / 15.7	MLS-00004E	Q4824	CB440
454 / 1000	150 / 5.9	MLS-00005E	Q4612	CB415
	200 / 7.9	MLS-00006E	Q4615	CB420
	300 / 11.8	MLS-00007E	Q4623	CB431
	400 / 15.7	MLS-00008E	Q4631	CB440
590 / 1300	150 / 5.9	MLS-00080E	Q4615	CB615
	230 / 9.1	MLS-00081E	Q4623	CB631
	300 / 11.8	MLS-00082E	Q4631	CB631
	393 / 15.5	MLS-00083E	Q4639	CB640

Downloads

Dual Drive Bolt-On System

The Bolt-On system is delivered as a kit for retrofitting. Using the retrofit system, you can retrofit your work table that previously could not be adjusted in height with just a few steps, thus making it height-adjustable.

System Includes

Two synchronized motor-driven pumps with controller and switch
6 cylinder "Bolt-On" lift systems use one 2.5m (8ft.) and two 3m (10ft.) sections of flexible tubing per pump
8 cylinder "Bolt-On" lift systems use two 2.5m (8ft.) and two 3m (10ft.) sections of flexible tubing per pump
Glides for each lift cylinder
Drilling templates, tubing clips and cable ties
Installation and operating instructions

Movotec Dual Drive Lift Systems are shipped assembled and ready for installation

The dimensions "A," "B" and "Y" of the drawings listed below (pump and CB cylinder) depend on the selected "maximum load" and the "adjustment range." Please use the table to determine the desired model of the bolt-on adjustment system.

System max. load (kg / lbs.)	Adjustment range (mm / in.)	System part number	Pump	Cylinder
680 / 1500	150 / 5.9	MLS-00020	Q3612	CB415
	200 / 7.9	MLS-00021	Q3615	CB420
	300 / 11.8	MLS-00022	Q3623	CB431
	400 / 15.7	MLS-00023	Q3631	CB440
907 / 2000	150 / 5.9	MLS-00024	Q4612	CB4612
	200 / 7.9	MLS-00025	Q4615	CB420
	300 / 11.8	MLS-00026	Q4623	CB431
	400 / 15.9	MLS-00027	Q4631	CB440
1134 / 2500	150 / 5.9	MLS-00090	Q4615	CB615
	230 / 9.1	MLS-00091	Q4623	CB631
	300 / 11.8	MLS-00092	Q4631	CB631
	400 / 15.7	MLS-00093	Q4639	CB640

Downloads

Corner Leg System with Hand Crank

The Corner Leg system is delivered with ready-to-install corner legs on conventional aluminum profiles. In this way, you can assemble an individual height-adjustable table based on the delivered ready-to-install corner legs.

System Includes

Pump with hand crank
Four Corner Leg Lift Cylinders
Two 2.5m (8 ft.) and two 3.0m (10 ft.) sections of flexible tubing
Four glides
Tubing clips and cable ties
Installation and operating instructions

Corner Leg Lift Systems are readily available and require minor assembly.

The dimensions "X" and "Y" of the drawings (pump and CL cylinder) depend on the selected "adjustment range." Please use the table to determine the desired model of the corner leg adjustment system. Other sizes are available by request.

System max. load (kg / lbs.)	Adjustment range (mm / in.)	System part number	Pump	Cylinder (4x)
340 / 750	150 / 5.9	MLS-00040	Q4809	CL450(150)
	200 / 7.9	MLS-00041	Q4812	CL450(200)
	300 / 11.8	MLS-00042	Q4818	CL450(300)
	400 / 15.7	MLS-00043	Q4824	CL450(400)

Downloads

Corner Leg System with Motor

The Corner Leg system is delivered with ready-to-install corner legs on conventional aluminum profiles. In this way, you can assemble an individual height-adjustable table based on the delivered ready-to-install corner legs.

System Includes

Pump with motor, controller and switch
Four Corner Leg Lift Cylinders
Two 2.5m (8ft.) and two 3.0m (10ft.) sections of flexible tubing
Four glides
Tubing clips and cable ties
Installation and operating instructions

Corner Leg Lift Systems are readily available and require minor assembly.

The dimension "Z" of the pump drawing depends on the selected "adjustment range." Please use the table to determine the desired model of the corner leg adjustment system. Other sizes are available by request.

System max. load (kg / lbs.)	Adjustment range (mm / in.)	System part number	Pump	Cylinder (4x)
340 / 750	150 / 5.9	MLS-00044	Q4809	CL450(150)
	200 / 7.9	MLS-00045	Q4812	CL450(200)
	300 / 11.8	MLS-00046	Q4818	CL450(300)
	400 / 15.7	MLS-00047	Q4824	CL450(400)

Downloads

ATU Lift System

You can assemble your custom height-adjustable 2-leg table with the ATU (aluminum table underframe) table system. All required frame and accessories parts can be ordered for this purpose, with the exception of the tabletop.

System Includes

A crank or motor drive pump
Two lift cylinders with ATU bracket
Two ATU's
Two flexible tubing sections 0.9m (3ft.) and 1.8m (6ft.)

The dimensions "A," "L" and "X" of the drawings are a function of the selected "system" and the "adjustment range." Please use the table to determine the desired ATU model.

Available Movotec systems

ATU system type	Adjustment range (mm / in.)	ATU retracted Length (mm / in.)	System part number	Pump	Cylinder (2x)
Hand crank	200 / 7.9	500 / 19.7	MLS-00060	Q2812	CE420
Hand crank	300 / 11.8	600 / 23.6	MLS-00061	Q2818	CE430
Electric motor	200 / 7.9	500 / 19.7	MLS-00062	Q2812	CE420
Electric motor	300 / 11.8	600 / 23.6	MLS-00063	Q2818	CE430

Available Workstation kits with frame and accessory

Length Cross Beam	System part number	Description
800 mm	D44-00033	ATU Workstation Kit 800 mm
1,000 mm	D44-00034	ATU Workstation Kit 1,000 mm
1,200 mm	D44-00035	ATU Workstation Kit 1,200 mm

Downloads

Accessories
You will find the screw feet, rollers, fasteners and control elements here.
Movotec-ZG
- More flexible for uneven weight distribution
- More flexible for lower weight
- Request quote for this added feature

Functionality

Do you need to know more?
Find out more about the functional principle here, such as the load distribution, operating temperature and standards.

Technical information
Reset Weight
Movotec lifting systems are single-acting systems. This means that the load is lifted with the help of a hand crank or a motor, while it is lowered with the help of gravity. This is why a minimum weight is required to retract every cylinder. This is to be taken into consideration when lifting loads with a low weight or in the event of an uneven distribution of the load on the working surface. The function can be improved with optional or short hoses for low loads.

Load distribution
Movotec lifting systems are designed for loads that are unevenly distributed on the working surface. The maximum load on the working surface may not exceed the system's rated lifting capacity. The maximum load per cylinder may not exceed the rated lifting capacity divided by the number of cylinders x 1.5.

Work cycle
Movotec lifting systems are designed for a work cycle of 10%. This means that nine minutes of resting time are provided per minute of operating time. Movotec lifting systems are not designed for continuous operation.

Operating temperature
Movotec lifting systems work best at operating temperatures between 0°C and 45°C.

Tube length
Specific lengths are specified for all standard Movotec lifting systems (see catalog program page 6). Individual hose lengths can be ordered at the customer's request within the permissible range. A ratio of tube lengths of 1:3 should be maintained. (Minimum hose length 0.5 m - maximum hose length 5 m).

Bending radius
The hydraulic lines to connect the pump to the lifting cylinders are to be laid so that the bending radius of the hoses is not less than 50 mm.

Durability test
Movotec lifting systems are tested regularly to ensure the flawless functioning of the system over at least 10,000 complete up / down cycles.
Standards
CE
Movotec components and systems are considered incomplete machines in the sense of the machinery directive 2006/42/EC. All components and assemblies of the Movotec lifting systems were designed in consideration of all fundamental safety and health guidelines.

UL Requirements
The SUSPA Movotec geared motor has a UL approval under the following UL approval number in conjunction with the controller and cables: E258745.

Hydraulic fluid "NT15®"
Movotec "NT15®" oil is used in all Movotec systems and applications. It is a lubricant with a special composition in food-grade quality. Movotec "NT15®" is a clear, odorless liquid that is harmless in the event of unintentional contact with food. Movotec "NT15®" is registered with the National Sanitation Foundation under the registration number 132507. Safety data sheets on material safety are available by request.

RoHS - Reduction of Pollutants
SUSPA takes its responsibility towards the environment very seriously. Accordingly, the SUSPA Movotec components meet the requirements of the RoHS [Restriction of Hazardous Substances Directive] EU directive.