Purchasing organization SUSPA

Optimal use of resources to constantly improve efficiency and quality - that's the goal that we always have in mind. To achieve this goal, we need powerful suppliers who will also support us in a partnership in the long term.

Are you interested in being one of these partners of the SUSPA group?

The conditions of purchase of SUSPA GmbH can be found in the download area to the right.

Our requirements range is divided into the following goods groups:

  • Bending Parts

    SUSPA GmbH uses bending parts with the following requirements:

    • Produced according to the drawing 
    • Round wire springs with a wire diameter 0.5 - 5 mm
    • From spring wire, sometimes also valve spring wire
    • Flat material bending parts made of spring sheet steel

     

    For more information, please contact:

    Tobias Mauracher

    Tel. +49 (9661) 81 56-745

    TMauracher@de.suspa.com

  • Chemistry

    SUSPA uses the following chemical substances:

    • Chemicals for grinding water treatment
    • Chemicals for the paint shop
    • Machining oils
    • Laboratory needs
    • Paint
    • Acids
    • Salts
    • Various special chemicals

     

    For more information, please contact:

    Ute Klug

    Tel. +49 (9187) 930-276

    UKlug(at)de.suspa.com

  • Turned Parts

    SUSPA uses turned parts with the following requirements:

    • Produced according to the drawing
    • Ø 1mm - Ø 50 mm
    • Steel, stainless steel, non-ferrous metal, plastic
    • Single-spindle turned parts
    • Multi-spindle turned parts
    • Long turned parts
    • CNC turned parts
    • Gearing parts

     

    For more information, please contact:

    Rudolf Seitz

    Tel. +49 (9661) 81 56-747

    RSeitz(at)de.suspa.com

  • Elastomers

    SUSPA uses elastomers with the following requirements:

    • Produced according to the drawing
    • Materials: EPDM, NBR; HNBR, PUR, TPE, PTFE
    • Seals, O-rings, foam, elastomer molded parts
    • Weight per part: 0.5 g / part up to 100 g / part

     

    For more information, please contact:

    Ute Klug

    Tel. +49 (9187) 930-276

    UKlug(at)de.suspa.com

  • Electrical Assemblies

    SUSPA uses electrical assemblies with the following requirements:

    • Produced according to the drawing
    • Cable
    • Switch
    • Wiring harnesses
    • Gear motors
    • Drives
    • Control systems
    • Various assembly work

     

    For more information, please contact:

    Rudolf Seitz

    Tel. +49 (9661) 81 56-747

    RSeitz(at)de.suspa.com

  • Cast Parts

    SUSPA uses cast parts with the following requirements:

    • Produced according to the drawing
    • Aluminum die-casting
    • Zinc die-casting
    • Magnesium die-casting
    • Partial plastic molding
    • Weight: from 2 g / part to 3 kg / part

     

    For more information, please contact:

    Rudolf Seitz

    Tel. +49 (9661) 81 56-747

    RSeitz(at)de.suspa.com

  • Cold Formed Parts

    SUSPA uses cold formed parts with the following requirements:

    • Produced according to the drawing
    • Sintered parts
    • Cold extruded parts
    • Materials: Aluminum, steel
    • MIM parts
    • Weight per part: 2 g / part up to 900 g / part

     

    For more information, please contact:

    Alzbeta Hofmann

    Tel. +49 (9187) 930-460

    AHofmann(at)de.suspa.com

  • Plastic Parts

    SUSPA uses plastic parts with the following requirements:

    • Produced according to the drawing
    • Injection molded plastic parts
    • Plastic turned parts
    • Gearing parts
    • Plastic overmold (inserts)
    • Materials: PA, ABS, PC, PE, PU, PF, POM, PP, PPS, SAN, PTFE, PC blends, PA blends, Duroplast, 2-K-parts

     

    For more information, please contact:

    Rudolf Seitz

    Tel. +49 (9661) 81 56-747

    RSeitz(at)de.suspa.com

  • Mechanical Assemblies

    SUSPA uses mechanical assemblies with the following requirements:

    • Produced according to the drawing
    • Various assembly work (manual assembly, automatic assembly)
    • Partially also including welding processes
    • Includes manufacturing / purchase of the components to be assembled (stamped parts, pipe shape parts, turned parts, aluminum extrusions...)

     

    For more information, please contact:

    Ernst Grünewald

    Tel. +49 (9187) 930-178

    EGruenewald(at)de.suspa.com

  • Standard parts / DIN parts

    SUSPA uses the following standards / DIN parts:

    • Screws
    • Bolts, pins
    • Nuts
    • Rivets
    • Rolling bearings, sliding bearings
    • Special parts similar to the standard

     

    For more information, please contact:

    Ernst Grünewald

    Tel. +49 (9187) 930-178

    EGruenewald(at)de.suspa.com

  • Profiles

    SUSPA uses profiles with the following requirements:

    • Produced according to the drawing
    • Materials: Steel, aluminum
    • Aluminum extrusion profiles
    • Steel rolled profiles
    • Aluminum rolled profiles
    • Partially mechanically machined and coated
    • Delivery lengths: Standard 6 m, fixed lengths

     

    For more information, please contact:

    Peter Halenke

    Tel. +49 (9187) 930-259

    PHalenke@de.suspa.com

  • Pipes

    SUSPA uses pipes with the following requirements:

    • Manufactured according to drawing specification
    • DIN EN 10305-1 / -2 / -3 seamlessly drawn, drawn, welded
    • Materials: Steel, partially with limited strength, as well as stainless steel
    • Wall thickness: 0.6 mm - 4 mm
    • Outer diameter: 12 to 100 mm
    • Shape: round, 4 Kt
    • Delivery length: 6 m, partially in fixed length

     

    For more information, please contact:

    Ute Klug

    Tel. +49 (9187) 930-276

    UKlug(at)de.suspa.com

  • Rod Steel

    SUSPA uses rod steel with the following requirements:

    • Produced according to factory standard
    • Materials: Machining steel, C-grades and stainless steel
    • Drawn, ground
    • Ø 4 - 30 mm
    • Delivery lengths: Standard 3 m

     

    For more information, please contact:

    Ute Klug

    Tel. +49 (9187) 930-276

    UKlug(at)de.suspa.com

  • Stamped Parts

    SUSPA uses stamped parts with the following requirements:

    • Produced according to the drawing
    • Stamped, embossed, punched, bent, rolled, deep-drawn, fine-stamped
    • Partial plastic molding
    • Weight: from 2 g / part to 3 kg / part

     

    For more information, please contact:

    Peter Halenke

    Tel. +49 (9187) 930-259

    PHalenke@de.suspa.com

  • Packaging

    SUSPA uses the following types of packaging:

    • Corrugated cardboard, corrugated cardboard boxes, corrugated cardboard blanks, gray board
    • Wooden pallets, wooden pallet frame system and accessories
    • Plastic packaging
    • Special packaging

     

    For more information, please contact:

    Tobias Mauracher

    Tel. +49 (9661) 81 56-745

    TMauracher@de.suspa.com

SUSPA® Inc.

Phone 616.241.4200

Fax 616.531.3310

sim@us.suspa.com

SUSPA GmbH

Ernst Grünewald

Phone +49 (9187) 930-178

EGruenewald@de.suspa.com

Kontakt-Formular Kontakt-Formular Kontakt-Formular

SUSPA® Inc.

Phone 616.241.4200

Fax 616.531.3310

sim@us.suspa.com

SUSPA GmbH

Ernst Grünewald

Phone +49 (9187) 930-178

EGruenewald@de.suspa.com

Kontakt-Formular Kontakt-Formular Kontakt-Formular