Hydraulic adjustment systems in the industrial sector

The hydraulic Movotec adjustment system consists of cylinders and a pump that is driven with a hand crank or an electric motor. The drive generated in this way drives the oil out of the pump into the cylinders or from the cylinders back into the pump. The cylinders are thus extended or retracted within the provided adjustment range (stroke).

The Movotec product range is composed of the following systems:

  • Bolt-On retrofit system with hand crank

    The Bolt-On system is delivered as a kit for retrofitting. Using the retrofit system, you can retrofit your work table that previously could not be adjusted in height with just a few steps, thus making it a sit stand workbench.

     

    The system includes

    • System with hand crank
    • One to four lifting cylinders
    • Hydraulic lines in individual lengths
    • Screw feet for each lifting cylinder
    • Boring templates, cable holders and cable ties
    • Assembly and operating instructions
    Bolt-On retrofit system with hand crank

    The dimensions "A," "B," "X" and "Y" of the drawings (pump and CB cylinder) depend on the "maximum load" and the "adjustment range." Please use the table to determine the desired model of the bolt-on adjustment system.

     

    max.
    load

    adjusting
    range

    Order no.

    US
    Order no.

    Pump

    Cylinder
    (4x)

    CAD
    340 kg

    150 mm03311001MLS-00001Q4809

    CB415

    200 mm 03311002 MLS-00002Q4812CB420
    300 mm03311003MLS-00003Q4818CB431
    400 mm03311004MLS-00004Q4824CB440
    454 kg150 mm03311005MLS-00005Q4612

    CB415

    200 mm03311006MLS-00006Q4615CB420
    300 mm03311007MLS-00007Q4623CB431
    400 mm03311008MLS-00008Q4631CB440

     

    590 kg

    150 mm03311080MLS-00080Q4615

    CB615

    230 mm03311081MLS-00081Q4623CB631
    300 mm03311082

    MLS-00082

    Q4631

    CB631

    393 mm03311083

    MLS-00083

    Q4639

    CB640

     

    Downloads

  • Bolt-On retrofit system with electric motor

    The Bolt-On system is delivered as a kit for retrofitting. Using the retrofit system, you can retrofit your work table that previously could not be adjusted in height with just a few steps, thus making it a height-adjustable workplace.

     

    The system includes

    • System with motor drive (including control and switch)
    • One to four lifting cylinders
    • Hydraulic lines in individual lengths
    • Screw feet for each lifting cylinder
    • Boring templates, cable holders and cable ties
    • Assembly and operating instructions

    Bolt-On retrofit system with electric motor

    The dimensions "A," "B" and "Y" of the drawings listed below (pump and CB cylinder) depend on the selected "maximum load" and the "adjustment range." Please use the table to determine the desired model of the bolt-on adjustment system.

     

    max.
    load

    adjusting
    range

    Order no.

    US
    Order no.

     Pump

    Cylinder
    (4x)

    CAD
    340 kg150 mm03311009MLS-00009EQ4809

    CB415

    200 mm03311010MLS-00010EQ4812CB420
    300 mm03311011 MLS-00011EQ4818CB431
    400 mm03311012MLS-00012EQ4824CB440
    454 kg  150 mm03311013MLS-00013EQ4612

    CB415

    200 mm03311014MLS-00014EQ4615CB420
    300 mm03311015MLS-00015EQ4623CB431
    400 mm03311016MLS-00016EQ4631CB440
    590 kg150 mm03311084MLS-00084EQ4615

    CB615

    230 mm03311085MLS-00085E Q4623CB631
    300 mm03311086

    MLS-00086E

    Q4631

    CB631

    393 mm03311087

    MLS-00087E

    Q4639

       CB640

     

    Downloads

  • Bolt-On retrofit system with dual drive

    The Bolt-On system is delivered as a kit for retrofitting. Using the retrofit system, you can retrofit your workbench that previously could not be adjusted in height with just a few steps, thus making it height adjustable.

     

    The system includes

    • Two synchronized, motor-driven systems with control and switch
    • Five to eight lifting cylinders for retrofitting
    • Hydraulic lines in individual lengths
    • Screw feet for each lifting cylinder
    • Boring templates, cable holders and cable ties
    • Assembly and operating instructions

     

    Bolt-On retrofit system with dual drive

    The dimensions "A," "B" and "Y" of the drawings listed below (pump and CB cylinder) depend on the selected "maximum load" and the "adjustment range." Please use the table to determine the desired model of the bolt-on adjustment system.

     

    max:
    load

    Adjustment range

    Quantity
    of
    Cylinder
    Order no.

    US
    Order no.

     
    Pump

     
    Cylinder
    (6x or 8x)

    CAD
    680 kg150 mm

    6
          

    03311028MLS-00028Q3612

    CB415

    200 mm03311029MLS-00029Q3615CB420
    300 mm03311030MLS-00030Q3623CB431
    400 mm03311031MLS-00031Q3631CB440
    907 kg150 mm8


    03311032MLS-00032Q4612

    CB415

    200 mm03311033MLS-00033Q4615CB420
    300 mm03311034MLS-00034Q4623CB431
    400 mm03311035MLS-00035Q4631CB440

     

    Downloads

  • System with ready-to-install corner legs - Corner leg with hand crank

    The Corner Leg system is delivered with ready-to-install corner legs on conventional aluminum profiles. In this way, you can assemble an individual height-adjustable table based on the delivered ready-to-install corner legs.

     

    The system includes

    • System with hand crank
    • Four lifting cylinders with aluminum profiles
    • Two 2.5 m and two 3.0 m long hydraulic lines
    • Four screw feet
    • Cable holders and cable ties
    • Assembly and operating instructions

    The dimensions "X" and "Y" of the drawings (pump and CL cylinder) depend on the selected "adjustment range." Please use the table to determine the desired model of the corner leg adjustment system. Other sizes are available by request.

     

    max.
    load

    adjusting
    range

    Order no.

    US
    Order no.

     
    Pump

    Cylinder
    (4x)

    CAD

    340 kg    

    150 mm03311040MLS-00040Q4809CL450(150)
    200 mm03311041MLS-00041Q4812CL450(200)
    300 mm03311042MLS-00042Q4818CL450(300)
    400 mm 03311043MLS-00043Q4824CL450(400)

     

     

    Downloads

  • System with ready-to-install corner legs - Corner leg with electric motor

    The Corner Leg system is delivered with ready-to-install corner legs on conventional aluminum profiles. In this way, you can assemble an individual height-adjustable table based on the delivered ready-to-install corner legs.

     

    The system includes

    • System with motor drive (including control and switch)
    • Four lifting cylinders with aluminum profiles
    • Two 2.5 m and two 3.0 m long hydraulic lines
    • Four screw feet
    • Cable holders and cable ties
    • Assembly and operating instructions

     

     

    System with ready-to-install corner legs - Corner leg with electric motor

    The dimension "Z" of the pump drawing depends on the selected "adjustment range." Please use the table to determine the desired model of the corner leg adjustment system. Other sizes are available by request.

    max.
    load

    adjusting
    range

    Order no.

    US
    Order no.

    Pump

    Cylinder
    (4x)

    CAD

    340 kg

    150 mm 03311048MLS-00048Q4809CL450(150)
    200 mm03311049MLS-00049Q4812CL450(200)
    300 mm03311050MLS-00050Q4818CL450(300)
    400 mm03311051MLS-00051 Q4824CL450(400)

     

    Downloads

  • Table Adjustment System ATU

    You can assemble your custom height-adjustable 2-leg table with the ATU (aluminum table underframe) table system. All required frame and accessories parts can be ordered for this purpose, with the exception of the tabletop.

     

    The ATU table system is modular and consists of two components:

    1. Movotec system (electric motor / hand crank) with two aluminum profiles as table legs (so-called ATU)

    2. Assembly kit with frame and accessory parts (cross-member, plate carrier, feet)

    Table Adjustment System ATU

     

    The dimensions "A," "L" and "X" of the drawings are a function of the selected "system" and the "adjustment range." Please use the table to determine the desired ATU model.

     

    Movotec system

    adjusting
    range

    Length retracted

    Order no.

    US order no.

    Pump

    Cylinder (2x)

    CAD
    Hand crank200 mm

    500 mm

    03311060MLS-00060Q2812CE420
    300 mm

    600 mm

    03311061MLS-00061Q2818CE430
    Electric motor200 mm

    500 mm

    03311064MLS-00064Q2812CE420

    300 mm

    600 mm03311065MLS-00065Q2818CE430

     

    Downloads

Accessories

  • Switches
    Low profile switchOffice switchDisplay switchRemote hand switch
    Low profile switchOffice switchRemote hand switch
    Order number: 09810009Order number: 09810010Order number: 09810006Order number: 09810023

     

     

     

    Foot switchIR Remote control switchDual Switch Splitter CableSwitch Interface Cable
    Foot switchIR Remote control switch
    • Allows use of two switch options on a single lift system
    • 200 mm cable length
    • Includes instructions with pinout for easy integration
      with other switches or PLC devices
    • 3 m cable length
    Order number: 09810024Order number: 09810013Order number: 09810020Order number: 09810026

     

     

  • Glides
    Standard sliding feetInstallation feetSliding polyamide feet
    Standard sliding feetInstallation feetSliding polyamide feet

    Order number: 07901031

    • Standard with anti-skid function
    • Polyamide base with
      non-skid TPE pad with
      M10 x 1.5 threaded steel bolts
      with locknut for adjustment

    Order number: 07900003

    • For fastening the actuators
      to the floor or to work surfaces
    • Aluminum base with M10 x 1.5
      threaded steel bolts with locknut
      for adjustment  

    Order number: 07901037

    • Standard sliding feet without
      anti-skid function´
    • Polyamide base with M10 x 1.5 threaded
      steel bolts with locknut for adjustment

     

     

      

  • Brackets
    Small mounting
    bracket set
    Large mounting bracket setL mounting
    bracket set
    Creform®
    bracket adaptor set
    Small Mounting Bracket SetLarge mounting bracket setL Mounting Bracket SetCreform® bracket adaptor set
    Order number: 07900002AOrder number: 07900001Order number: 07900018Order number: 07911027*
    * for easy fastening of Creform® connectors
    (connectors not included)
  • Hand cranks

    Aluminium cranks

    • Offered in standard and extended versions
    • Crank body is made from durable aluminum diecastwith black powder coat finish
    • Grip conveniently folds away into crank body when not in use
    • Cranks are easily secured to pump shaft using a 3mm hex key (Allen) wrench
    Aluminium Crank with dimensions
    Standard (Z=40 mm)Extended (Z=65 mm)
    Aluminium Crank shortAluminium Crank extended
    Order number: 07900039
    CAD Icon STEP file
    Order number: 07900043
    CAD Icon STEP file

     

     

     

    Plastic cranks

    • Offered in small and large crank body versions
    • Crank body is made from durable black glass-filled nylon with rotating grip
    • Crank body and grip fold away completely under worksurfacewhen not use
    • Cranks are easily secured to pump shaft using a 2mm hex key (Allen) wrench
    Plastic crank with dimension

     

     

    Small (100 mm)Large (130 mm)
    Plastic crank shortPlastic crank large
    Order number: 07900040
    CAD Icon STEP file
    Order number: 07900041
    CAD Icon STEP file

     

     

     

     

     

     

SUSPA® Inc.

Phone 616.241.4200

Fax 616.531.3310

sim@us.suspa.com

Kontakt-Formular Kontakt-Formular Contact form

SUSPA® Inc.

Phone 616.241.4200

Fax 616.531.3310

sim@us.suspa.com

Kontakt-Formular Kontakt-Formular Contact form

Functionality

Do you need to know more?
Find out more about the functional principle here, such as the load distribution, operating temperature and standards.

 

  • Technical information

    Reset Weight

    Movotec lifting systems are single-acting systems. This means that the load is lifted with the help of a hand crank or a motor, while it is lowered with the help of gravity. This is why a minimum weight is required to retract every cylinder. This is to be taken into consideration when lifting loads with a low weight or in the event of an uneven distribution of the load on the working surface. The function can be improved with optional or short hoses for low loads.

    Load distribution

    Movotec lifting systems are designed for loads that are unevenly distributed on the working surface. The maximum load on the working surface may not exceed the system's rated lifting capacity. The maximum load per cylinder may not exceed the rated lifting capacity divided by the number of cylinders x 1.5.

    Work cycle

    Movotec lifting systems are designed for a work cycle of 10%. This means that nine minutes of resting time are provided per minute of operating time. Movotec lifting systems are not designed for continuous operation.

    Operating temperature

    Movotec lifting systems work best at operating temperatures between 0°C and 45°C.

    Tube length

    Specific lengths are specified for all standard Movotec lifting systems (see catalog program page 6). Individual hose lengths can be ordered at the customer's request within the permissible range. A ratio of tube lengths of 1:3 should be maintained. (Minimum hose length 0.5 m - maximum hose length 5 m).

    Bending radius

    The hydraulic lines to connect the pump to the lifting cylinders are to be laid so that the bending radius of the hoses is not less than 50 mm.

    Durability test

    Movotec lifting systems are tested regularly to ensure the flawless functioning of the system over at least 10,000 complete up / down cycles.

  • Standards

    CE

    Movotec components and systems are considered incomplete machines in the sense of the machinery directive 2006/42/EC. All components and assemblies of the Movotec lifting systems were designed in consideration of all fundamental safety and health guidelines.

    UL Requirements

    The SUSPA Movotec geared motor has a UL approval under the following UL approval number in conjunction with the controller and cables: E258745.

    Hydraulic fluid "NT15®"

    Movotec "NT15®" oil is used in all Movotec systems and applications. It is a lubricant with a special composition in food-grade quality. Movotec "NT15®" is a clear, odorless liquid that is harmless in the event of unintentional contact with food. Movotec "NT15®" is registered with the National Sanitation Foundation under the registration number 132507. Safety data sheets on material safety are available by request.

    RoHS - Reduction of Pollutants

    SUSPA takes its responsibility towards the environment very seriously. Accordingly, the SUSPA Movotec components meet the requirements of the RoHS [Restriction of Hazardous Substances Directive] EU directive.

Sector finder

SUSPA's hydraulic adjustment system offers comfort and safety in many applications.