Tlumiče rázů a vibrací Softline HD

Hydraulické tlumiče SUSPA Softline HD se liší v průměru těla, průměru pístnice, síly a v různých provedeních:

TypØ trubky Ø pístniceSíla (N)
HD 1212 mm  4 mm50 - 400 N
HD 1515 mm  6 mm50 - 500 N
HD 1818 mm  8 mm

50 - 2000 N

HD 2222 mm10 mm50 - 2500 N
HD 25 (standard)25 mm  8 mm100 - 5000 N
HD 3434 mm  8 mm100 - 5000 N
HD 3838 mm10 mm100 - 6000 N


Tyto velikosti jsou k dispozici také na vyžádání s tlumením závislým na trase. Tlumení závislé na dráze je změna v cestě konstantní rychlostí. Je třeba poznamenat, že se síly (tlumící síly) mohou měnit při vyšších zkušebních rychlostech.

Velikost uvedené v tabulce výše jsou k dispozici s následujícími modely v závislosti na aplikaci: 

ModelIdle strokePositional independenceExtension forceAdjustability
STD hydraulic damperx
GD With gas pressurex
GDTK With gas pressure and separating pistonxx
BV With bottom valve
BVM With bottom valve and membranex
DOUBLE tube hydraulic damperx

Selection matrix

TypSTDGD GDTKBVBVMDOUBLE
HD 12xx
HD 15xx
HD 18xx
HD 22xx
HD 25xxxx
HD 34x
HD 38x
  • Standard hydraulic damper

    The standard damper is suitable for versatile applications. A compensation chamber remains in the pressure pipe for the retracting piston rod. An idle stroke may result here depending on the installation position.

     

    Characteristics

    • Without extension force F1
    • With idle stroke
    • Positionally-dependent

     

    Application Examples

    • Waste containers
    • Shop counter
    • Medical applications
    • Furniture flaps
    • Commercial vehicle interior
    • Overhead compartment
    • Seats for commercial vehicles
  • Hydraulic dampers with gas pressure (GD)

    The damper with gas pressure corresponds to the standard damper, but with extension force.

     

    Characteristics

    • With extension force F1
    • With idle stroke
    • Positionally-dependent

     

    Application Examples

    • Industrial applications
    • Seats for commercial vehicles
  • Hydraulic dampers with gas pressure and separating piston (GDTK)

    For dampers with gas pressure and separating pistons, oil and gas is separated by the separating piston so that the damper can be installed in any position without having an idle stroke.

     

    Characteristics

    • With extension force F1
    • With idle stroke
    • Positionally independent 

     

    Application Examples

    • Waste containers
    • Overrun brakes
    • Industrial applications
    • Commercial vehicle interior
    • Seats for commercial vehicles
  • Hydraulic dampers with bottom valve (BV)

    With this type of damper, the bottom valve separates the oil from the compensation chamber. The damper has no extension force and has to be installed with the piston rod facing down.

     

    Characteristics

    • Without extension force F1
    • Without idle stroke
    • Positionally dependent  

     

    Application Examples

    • Shop counter
    • Commercial vehicle interior
    • Engine vibration damper
    • Belt tensioner 
    • Seats for commercial vehicles
  • Hydraulic campers with bottom valve and membrane (BVM)

    The membrane in the compensation chamber behind the bottom valve expands when loaded (pressure) or contracts (tension). The damper thus works without extension force in any installation position.

     

    Characteristics

    • without extension force F1
    • without idle stroke
    • Positionally independent (installation of the piston in any position) 

     

    Application Examples

    • Overrun brakes
    • Commercial vehicle seats
    • Belt tensioner
    • Universally applicable
  • 2-tube hydraulic damper

    The 2-tube dampers consist of an inner and outer tube, whereby the inner tube forms the working space. The space between the two tubes accommodates the oil displaced by the retracting piston rod. The damping force spring of the 2-tube dampers can be variably adjusted due to the internal structure. The weight is also reduced to a minimum due to the use of an aluminum outer tube.


    Characteristics

    • Model HD34: Ø Outer tube 34 mm oval (not adjustable)
    • Model HD38: Ø Outer tube 38 mm round (adjustable)
    • Ø Piston rod 10 mm
    • Damping force max. 6000 N
    • Without extension force F1
    • Without idle stroke
    • Positionally dependent (installation of the piston rod on top)

     

    Application Examples

    • Commercial vehicle seats (vertical damping)

SUSPA® Inc.

Phone 616.241.4200

Fax 616.531.3310

sim@us.suspa.com

Kontakt-Formular Kontakt-Formular Kontaktní formulář

SUSPA® Inc.

Phone 616.241.4200

Fax 616.531.3310

sim@us.suspa.com

Kontakt-Formular Kontakt-Formular Kontaktní formulář

Uplatnění v oborech

Hydraulické tlumiče SUSPA Softline nabízejí komfort a bezpečnost v mnoha oborech a aplikacích.