Hydraulic lift systems in the industrial sector

The hydraulic Movotec lift system consists of cylinders and a pump that is driven with a hand crank or an electric motor. The drive generated in this way drives the oil out of the pump into the cylinders or from the cylinders back into the pump. The cylinders are thus extended or retracted within the provided adjustment range (stroke).

The Movotec product range is composed of the following systems:

  • Bolt-On System with Hand Crank

    The Bolt-On system is delivered as a kit for retrofitting. Using the retrofit system, you can retrofit your work table that previously could not be adjusted in height with just a few steps, thus making it height-adjustable.
     

    SUSPA bolt-on with hand crank for Movotec height adjustment

    System Includes

    • Pump with hand crank
    • Four "Bolt-On" lift cylinders
    • Two 2.5m (8 ft.) and two 3m (10 ft.) sections of flexible tubing
    • Four glides
    • Drilling templates, tubing clips and cable ties
    • Installation and operating instructions

     

    Movotec "Bolt-On" lift systems are readily available, shipped completely assembled and ready for installation.

    The dimensions "A," "B," "X" and "Y" of the drawings (Pump and CB cylinder) depend on the "maximum load" and the "adjustment range." Please use the table to determine the desired model of the bolt-on adjustment system.

     

    System max. load 
    (kg / lbs.)

    Adjustment range
    (mm / in.) 

    System part number

    Pump

    Cylinder
    (4x)

    CAD
    340 / 750
     
    150 / 5.9MLS-00001Q4809

    CB415

    200 / 7.9MLS-00002Q4812CB420
     300 / 11.8MLS-00003Q4818CB431
     400 / 15.7MLS-00004Q4824CB440
    454 / 1000150 / 5.9MLS-00005Q4612

    CB415

    200 / 7.9MLS-00006Q4615CB420
     300 / 11.8MLS-00007Q4623CB431
     400 / 15.7MLS-00008Q4631CB440

     

    590 / 1300
     

    150 / 5.9MLS-00080Q4615

    CB615

    230 / 9.1MLS-00081Q4623CB631
     300 / 11.8MLS-00082Q4631

    CB631

     393 / 15.5MLS-00083Q4639

    CB640

     

    Downloads

  • Bolt-On System with Motor

    The Bolt-On system is delivered as a kit for retrofitting. Using the retrofit system, you can retrofit your work table that previously could not be adjusted in height with just a few steps, thus making it height-adjustable.
     

    Bolt-on with electric motor height adjustment system from SUSPA

     

    System Includes

    • Pump with motor, controller and switch
    • Four "Bolt-On" lift cylinders
    • Two 2.5mm (8 ft.) and two 3m (10 ft.) sections of flexible tubing
    • Four glides
    • Drilling templates, tubing clips and cable ties
    • Installation and operating instructions

     

    Movotec "Bolt-On" lift systems are readily available, shipped completely assembled and ready for installation.

     

    The dimensions "A," "B" and "Z" of the drawings listed below (pump and CB cylinder) depend on the selected "maximum load" and the "adjustment range." Please use the table to determine the desired model of the bolt-on adjustment system.

     

    System max. load 
    (kg / lbs.)

    Adjustment range
    (mm / in.) 

    System part number

     Pump

    Cylinder
    (4x)

    CAD
    340 / 750150 / 5.9MLS-00001EQ4809

    CB415

    200 / 7.9MLS-00002EQ4812CB420
    300 / 11.8MLS-00003EQ4818CB431
    400 / 15.7MLS-00004EQ4824CB440
    454 / 1000 150 / 5.9MLS-00005EQ4612

    CB415

    200 / 7.9MLS-00006EQ4615CB420
    300 / 11.8MLS-00007EQ4623CB431
    400 / 15.7MLS-00008EQ4631CB440
    590 / 1300150 / 5.9MLS-00080EQ4615

    CB615

    230 / 9.1MLS-00081EQ4623CB631
    300 / 11.8MLS-00082EQ4631

    CB631

    393 / 15.5

    MLS-00083E

    Q4639

       CB640

     

    Downloads

  • Dual Drive Bolt-On System

    The Bolt-On system is delivered as a kit for retrofitting. Using the retrofit system, you can retrofit your work table that previously could not be adjusted in height with just a few steps, thus making it height-adjustable.

     

    Retrofit bolt-on dual drive for the hydraulic height adjustment

     

     

    System Includes

    • Two synchronized motor-driven pumps with controller and switch
    • 6 cylinder "Bolt-On" lift systems use one 2.5m (8ft.) and two 3m (10ft.) sections of flexible tubing per pump
    • 8 cylinder "Bolt-On" lift systems use two 2.5m (8ft.) and two 3m (10ft.) sections of flexible tubing per pump
    • Glides for each lift cylinder
    • Drilling templates, tubing clips and cable ties
    • Installation and operating instructions

     

    Movotec Dual Drive Lift Systems are shipped assembled and ready for installation

     

    The dimensions "A," "B" and "Y" of the drawings listed below (pump and CB cylinder) depend on the selected "maximum load" and the "adjustment range." Please use the table to determine the desired model of the bolt-on adjustment system.

    System max. load 
    (kg / lbs.)

    Adjustment range
    (mm / in.) 

    System part number

     
    Pump

     
    Cylinder

    CAD
    680 / 1500150 / 5.9MLS-00020Q3612

    CB415

    200 / 7.9MLS-00021Q3615

    CB420

    300 / 11.8MLS-00022Q3623

    CB431

    400 / 15.7MLS-00023Q3631

    CB440

    907 / 2000150 / 5.9MLS-00024Q4612

    CB4612

    200 / 7.9MLS-00025Q4615

    CB420

    300 / 11.8MLS-00026Q4623

    CB431

    400 / 15.9MLS-00027Q4631

    CB440


    1134 / 2500

     
    150 / 5.9MLS-00090Q4615CB615 
    230 / 9.1MLS-00091Q4623CB631 
    300 / 11.8MLS-00092Q4631CB631 
    400 / 15.7MLS-00093Q4639CB640 

     

     

     

     

     

     

     

     

     

    Downloads

  • Corner Leg System with Hand Crank

    The Corner Leg system is delivered with ready-to-install corner legs on conventional aluminum profiles. In this way, you can assemble an individual height-adjustable table based on the delivered ready-to-install corner legs.

    Height adjustment system with ready-to-install corner legs - Corner leg with hand crank

     

    System Includes

    • Pump with hand crank
    • Four Corner Leg Lift Cylinders
    • Two 2.5m (8 ft.) and two 3.0m (10 ft.) sections of flexible tubing
    • Four glides
    • Tubing clips and cable ties
    • Installation and operating instructions

     

    Corner Leg Lift Systems are readily available and require minor assembly.

     

    The dimensions "X" and "Y" of the drawings (pump and CL cylinder) depend on the selected "adjustment range." Please use the table to determine the desired model of the corner leg adjustment system. Other sizes are available by request.

     

    System max. load 
    (kg / lbs.)

    Adjustment range
    (mm / in.) 

    System part number

     
    Pump

    Cylinder
    (4x)

    CAD

    340 / 750

    150 / 5.9MLS-00040Q4809CL450(150)
    200 / 7.9MLS-00041Q4812CL450(200)
    300 / 11.8MLS-00042Q4818CL450(300)
    400 / 15.7 MLS-00043Q4824CL450(400)

     

     

    Downloads

  • Corner Leg System with Motor

    The Corner Leg system is delivered with ready-to-install corner legs on conventional aluminum profiles. In this way, you can assemble an individual height-adjustable table based on the delivered ready-to-install corner legs.

     

    Movotec Corner Leg from SUSPA

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    System Includes

    • Pump with motor, controller and switch
    • Four Corner Leg Lift Cylinders
    • Two 2.5m (8ft.) and two 3.0m (10ft.) sections of flexible tubing
    • Four glides
    • Tubing clips and cable ties
    • Installation and operating instructions 

     

    Corner Leg Lift Systems are readily available and require minor assembly.

     

    The dimension "Z" of the pump drawing depends on the selected "adjustment range." Please use the table to determine the desired model of the corner leg adjustment system. Other sizes are available by request.

     

    System max. load 
    (kg / lbs.)

    Adjustment range
    (mm / in.) 

    System part number

    Pump

    Cylinder
    (4x)

    CAD

    340 / 750

    150 / 5.9MLS-00044Q4809CL450(150)
    200 / 7.9MLS-00045Q4812CL450(200)
    300 / 11.8MLS-00046Q4818CL450(300)
    400 / 15.7MLS-00047Q4824CL450(400)

     

    Downloads

  • ATU Lift System

    You can assemble your custom height-adjustable 2-leg table with the ATU (aluminum table underframe) table system. All required frame and accessories parts can be ordered for this purpose, with the exception of the tabletop.
     

    Height-adjustment system ATU

     

     

     

     

     

     

    System Includes

    • A crank or motor drive pump
    • Two lift cylinders with ATU bracket
    • Two ATU's
    • Two flexible tubing sections 0.9m (3ft.) and 1.8m (6ft.)

     

     

    The dimensions "A," "L" and "X" of the drawings are a function of the selected "system" and the "adjustment range." Please use the table to determine the desired ATU model.

     

    ATU system type

    Adjustment range
    (mm / in.) 

    ATU retracted Length 
    (mm / in.) 

    System part number

    Pump

    Cylinder (2x)

    CAD
    Hand crank200 / 7.9

    500 / 19.7

    MLS-00060Q2812CE420
    300 / 11.8

    600 / 23.6

    MLS-00061Q2818CE430
    Electric motor200 / 7.9

    500 / 19.7

    MLS-00062Q2812CE420

    300 / 11.8

    600 / 23.6

    MLS-00063

    Q2818CE430

     

    Downloads

  • Accessories

    You will find the screw feet, rollers, fasteners and control elements here.

  • Movotec-ZG

    •    More flexible for uneven weight distribution
    •    More flexible for lower weight
    •    Request quote for this added feature

SUSPA® Inc.

Phone 616.241.4200

Fax 616.531.3310

sim@us.suspa.com

Kontakt-FormularKontakt-FormularContact form

SUSPA® Inc.

Phone 616.241.4200

Fax 616.531.3310

sim@us.suspa.com

Kontakt-FormularKontakt-FormularContact form

Functionality

Do you need to know more?
Find out more about the functional principle here, such as the load distribution, operating temperature and standards.

 

  • Technical information

    Reset Weight

    Movotec lifting systems are single-acting systems. This means that the load is lifted with the help of a hand crank or a motor, while it is lowered with the help of gravity. This is why a minimum weight is required to retract every cylinder. This is to be taken into consideration when lifting loads with a low weight or in the event of an uneven distribution of the load on the working surface. The function can be improved with optional or short hoses for low loads.

    Load distribution

    Movotec lifting systems are designed for loads that are unevenly distributed on the working surface. The maximum load on the working surface may not exceed the system's rated lifting capacity. The maximum load per cylinder may not exceed the rated lifting capacity divided by the number of cylinders x 1.5.

    Work cycle

    Movotec lifting systems are designed for a work cycle of 10%. This means that nine minutes of resting time are provided per minute of operating time. Movotec lifting systems are not designed for continuous operation.

    Operating temperature

    Movotec lifting systems work best at operating temperatures between 0°C and 45°C.

    Tube length

    Specific lengths are specified for all standard Movotec lifting systems (see catalog program page 6). Individual hose lengths can be ordered at the customer's request within the permissible range. A ratio of tube lengths of 1:3 should be maintained. (Minimum hose length 0.5 m - maximum hose length 5 m).

    Bending radius

    The hydraulic lines to connect the pump to the lifting cylinders are to be laid so that the bending radius of the hoses is not less than 50 mm.

    Durability test

    Movotec lifting systems are tested regularly to ensure the flawless functioning of the system over at least 10,000 complete up / down cycles.

  • Standards

    CE

    Movotec components and systems are considered incomplete machines in the sense of the machinery directive 2006/42/EC. All components and assemblies of the Movotec lifting systems were designed in consideration of all fundamental safety and health guidelines.

    UL Requirements

    The SUSPA Movotec geared motor has a UL approval under the following UL approval number in conjunction with the controller and cables: E258745.

    Hydraulic fluid "NT15®"

    Movotec "NT15®" oil is used in all Movotec systems and applications. It is a lubricant with a special composition in food-grade quality. Movotec "NT15®" is a clear, odorless liquid that is harmless in the event of unintentional contact with food. Movotec "NT15®" is registered with the National Sanitation Foundation under the registration number 132507. Safety data sheets on material safety are available by request.

    RoHS - Reduction of Pollutants

    SUSPA takes its responsibility towards the environment very seriously. Accordingly, the SUSPA Movotec components meet the requirements of the RoHS [Restriction of Hazardous Substances Directive] EU directive.

Sector finder

SUSPA's® hydraulic adjustment system offers comfort and safety in many applications.